• Switch Technology: Store and Forward Technology with 32Gbps Switch.
• System Throughput: 8.3 Mega packet per second
• CPU performance: 2000
• Packet Buffer: 32 bits ARM
    - 9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch
    - dog timer.
• System Memory: 8M bytes flash ROM, 64M bytes SDRAM
• Packet Buffer: 1M bits shared memory for packet buffer
• Forwarding performance: 14,880 pps for Ethernet and 148,800 pps for Fast Ethernet, 1488,100 pps for Gigabit Ethernet.
• Environment Monitoring: Embedded board
    - level thermal detector for system temperature monitoring
• Configuration and monitoring interface: Telnet, local RS
    - 232 console, Web
    - browser interface, SNMP, Trap and SMTP interface.Cisco
    - Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP Client, warm start, factory default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.
• Telnet & Local Console: Supports command line interface
• SNMP: v1, v2c, v3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address
• SNMP MIB: MIBII, Bridge MIB, Ethernet
    - like MIB, VLAN MIB, IGMP MIB, Siselectron Technology Private MIB
• Siselectron Technology Utility: Supports Siselectron Technology NMS with IEEE 802.1AB Link Layer. Discovery Protocol for device and link auto
    - topology discovery
• Network Time Protocol: Supports NTP protocol with daylight saving function and localized time sync function
• Management IP Security: IP address security to prevent unauthorized access
• E
    - mail Warning: 4 receipt E
    - mail accounts with mail server authentication
• System Log: Supports both Local or remote Server with authentication
• Port Configuration: Port link Speed, Link mode, current status and enable/disable
• Port Trunk: IEEE 802.3ad port aggregation and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups include Gigabit Ethernet port
• VLAN: IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries 3 VLAN link modes
    - Trunk, Hybrid and Link access
• Private VLAN: Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN
• IEEE802.1 QinQ: Supports Double VLAN Tag function for implementing Metro Network topologies
• Class of Service: IEEE 802.1p class of service; per port 4 priority queues
• Trafic Prioritize: Supports 4 physical queues, weighted fair queuing (W.R.R.) and Strict Priority scheme, which follows 802.1p CoS tag and IPv4 ToS/ DiffServ information to prioritize the trafic of your industrial network
• IGMP Snooping: IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies
    - drop.
• Rate Control: Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets
• Port Mirroring: Online trafic monitoring on multiple selected ports
• Port Security: Port security to assign authorized MAC to specific port
• DHCP: DHCP Client, DHCP Server with IP & MAC Address binding, DHCP relay and port based DHCP server
• IEEE 802.1x: Port based network access control
• PoE Standards: IEEE 802.3af / IEEE 802.3at End
    - span wiring architecture
• PoE Operating Mode: Auto mode: Auto detects and powering by IEEE 802.3af, IEEE 802.3at 2
    - event / 2
    - event plus LLDP behaviorsForced mode: User con¿gured power consumption without detection, classification
• PoE forwarding conductor: V+: RJ
    - 45 conductor 3,6 V
    - : RJ
    - 45 conductor 1,2
• Power forwarding ability: IEEE 802.3af: 15.4w /port, IEEE 802.3at:30w/port
• PoE System Power Budget: 120W @ 75°C / 240W @ 60°C, 95 Humidity, DC 48V power input
• Power Budget Control: Port
    - based system power budget control with first plug
    - in high priority mechanism
• Power Consumption: 8 Watts 50V (Maximum) without PD loading

• Enclosure Port: 10/100Mbps PSE port: 8 x RJ
    - 45 Gigabit Ethernet port : 2 x RJ
    - 45 with auto DI/MDI
    - X function100Mbps / 1000Mbps Fiber port : 2 x SFP Socket for SFP fiber transceiver with Hot
    - swappable and D.D.M. functions Console port : 1 x RJ45 for system configuration. Digital Input / Relay Output port: 4
    - Pin removable terminal block connector. Power input port: 4
    - Pin removable terminal block connector
• Cables: 100 Base
    - TX: 2
    - pairs UTP/STP/FTP Cat.5 cable, EIA/TIA
    - 568B 100
    - ohm (100m)1000 Base
    - T: 4
    - pair UTP/STP/FTP Cat.5e cable, EIA/TIA
    - 568B 100
    - ohm (100m) Uses STP or FTP cable can provide higher electromagnetic resistance to correspond vertical market standard, such as rail way EMC – EN50121
    - 4.
• Digital Input: Digital Input (Hi): DC 11V~30V Digital Input (Low): DC 10V~0V Supports sink type signal input with photo
    - coupler isolation
• Diagnostic Indicators: Power: Green On: (System power applied) D.I.: Green On (digital signal high level is detected) D.O.: Red On. (relay active and form as) on Sys: Green On (System Ready), Blinking (System perform firmware upgrade) R.S. (Ring status): Green on (Ring normal) / Blinking (Ring with wrong port), Yellow on (Ring abnormal) / Blinking (device's ring port failed) LNK (Link): Green on, ACT (Active): Green Blinking PoE: Yellow on ( PoE is applying power)

SNM2410 Brochure_0.pdf

Empty.

SNM2410 qig_0.pdf